dmesg - 2012-06-06 15:53
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-220.17.1.el6.x86_64 (mockbuild@c6b5.bsys.dev.centos.org) (gcc version 4.4.6 20110731 (Red Hat 4.4.6-3) (GCC) ) #1 SMP Wed May 16 00:01:37 BST 2012
Command line: ro root=/dev/mapper/vg_livedvd-lv_root rd_LVM_LV=vg_livedvd/lv_root rd_LVM_LV=vg_livedvd/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=es crashkernel=auto rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bfe80000 (usable)
BIOS-e820: 00000000bfe80000 - 00000000bfe92000 (ACPI data)
BIOS-e820: 00000000bfe92000 - 00000000bff00000 (ACPI NVS)
BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI present.
SMBIOS version 2.4 @ 0xF62B0
DMI: IBM IBM IntelliStation M Pro -[922992Y]-/M50, BIOS IBM BIOS Version 1.32-[GVE132AUS-1.32]- 06/13/2007
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0C0000000 mask FC0000000 uncachable
1 base 000000000 mask F00000000 write-back
2 base 100000000 mask FC0000000 write-back
3 base 0BFF00000 mask FFFF00000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 3GB, range: 1GB, type UC
reg 1, base: 0GB, range: 4GB, type WB
reg 2, base: 4GB, range: 1GB, type WB
reg 3, base: 3071MB, range: 1MB, type UC
total RAM covered: 4095M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3071MB, range: 1MB, type UC
reg 3, base: 4GB, range: 1GB, type WB
e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbfe80 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bfe80000
0000000000 - 00bfe00000 page 2M
00bfe00000 - 00bfe80000 page 4k
kernel direct mapping tables up to bfe80000 @ 8000-d000
init_memory_mapping: 0000000100000000-0000000140000000
0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ b000-11000
RAMDISK: 37099000 - 37fefa24
ACPI: RSDP 00000000000f6320 00014 (v00 PTLTD )
ACPI: RSDT 00000000bfe8abae 00044 (v01 PTLTD RSDT 06040000 LTP 00000000)
ACPI: FACP 00000000bfe91c5f 00074 (v01 INTEL 06040000 PTL 00000003)
ACPI: DSDT 00000000bfe8b8d5 0638A (v01 INTEL GLENWOOD 06040000 MSFT 0100000E)
ACPI: FACS 00000000bfe92fc0 00040
ACPI: SLIC 00000000bfe91cd3 00176 (v01 06040000 ASUS 00000001)
ACPI: MCFG 00000000bfe91e49 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
ACPI: HPET 00000000bfe91e85 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
ACPI: APIC 00000000bfe91ebd 00084 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 00000000bfe91f41 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: ASF! 00000000bfe91f69 00097 (v32 MBI 06040000 00000000)
ACPI: SSDT 00000000bfe8abf2 00A35 (v01 PTLTD RSDT 00003000 INTL 20050228)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000140000000
Bootmem setup node 0 0000000000000000-0000000140000000
NODE_DATA [000000000000c000 - 000000000003ffff]
bootmap [0000000000040000 - 0000000000067fff] pages 28
(8 early reservations) ==> bootmem [0000000000 - 0140000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000200c864] TEXT DATA BSS ==> [0001000000 - 000200c864]
#3 [0037099000 - 0037fefa24] RAMDISK ==> [0037099000 - 0037fefa24]
#4 [000009cc00 - 0000100000] BIOS reserved ==> [000009cc00 - 0000100000]
#5 [000200d000 - 000200d1e1] BRK ==> [000200d000 - 000200d1e1]
#6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
#7 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000]
found SMP MP-table at [ffff8800000f6350] f6350
Reserving 129MB of memory at 48MB for crashkernel (System RAM: 5120MB)
[ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x0000009c
0: 0x00000100 -> 0x000bfe80
0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1048091
DMA zone: 56 pages used for memmap
DMA zone: 106 pages reserved
DMA zone: 3833 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 767672 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009c000 - 000000000009d000
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
PM: Registered nosave memory: 00000000bfe80000 - 00000000bfe92000
PM: Registered nosave memory: 00000000bfe92000 - 00000000bff00000
PM: Registered nosave memory: 00000000bff00000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880028200000 s92632 r8192 d22056 u524288
pcpu-alloc: s92632 r8192 d22056 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030065
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_livedvd-lv_root rd_LVM_LV=vg_livedvd/lv_root rd_LVM_LV=vg_livedvd/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=es crashkernel=129M@0M rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 3903736k/5242880k available (5086k kernel code, 1050516k absent, 288628k reserved, 7227k data, 1244k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:440
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2399.866 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.73 BogoMIPS (lpj=2399866)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20793 entries in 82 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
CPU1: Thermal monitoring handled by SMI
#2
CPU2: Thermal monitoring handled by SMI
#3 Ok.
CPU3: Thermal monitoring handled by SMI
Brought up 4 CPUs
Total of 4 processors activated (19209.12 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2616 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 32
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - e20fffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xd2500000-0xd2503fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x3000-0x301f]
pci 0000:00:1d.1: reg 20 io port: [0x3020-0x303f]
pci 0000:00:1d.2: reg 20 io port: [0x3040-0x305f]
pci 0000:00:1d.3: reg 20 io port: [0x3060-0x307f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xd2504000-0xd25043ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0500 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0500 (mask 00ff)
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x30a0-0x30af]
pci 0000:00:1f.3: reg 20 io port: [0x3080-0x309f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xd1000000-0xd1ffffff]
pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xd0000000-0xd0ffffff]
pci 0000:01:00.0: reg 24 io port: [0x4000-0x407f]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:01.0: bridge io port: [0x4000-0x4fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xd0000000-0xd1ffffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:19:00.0: reg 10 64bit mmio: [0xd2200000-0xd220ffff]
pci 0000:19:00.0: PME# supported from D3hot D3cold
pci 0000:19:00.0: PME# disabled
pci 0000:19:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: bridge 32bit mmio: [0xd2200000-0xd22fffff]
pci 0000:1d:00.0: reg 10 io port: [0x5000-0x50ff]
pci 0000:1d:00.0: reg 14 64bit mmio: [0xd2310000-0xd2313fff]
pci 0000:1d:00.0: reg 1c 64bit mmio: [0xd2300000-0xd230ffff]
pci 0000:1d:00.0: reg 30 32bit mmio pref: [0x000000-0x0fffff]
pci 0000:1d:00.0: supports D1 D2
pci 0000:1d:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.5: bridge io port: [0x5000-0x5fff]
pci 0000:00:1c.5: bridge 32bit mmio: [0xd2300000-0xd23fffff]
pci 0000:21:09.0: reg 10 32bit mmio: [0xd2404000-0xd24047ff]
pci 0000:21:09.0: reg 14 32bit mmio: [0xd2400000-0xd2403fff]
pci 0000:21:09.0: supports D1 D2
pci 0000:21:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:21:09.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xd2400000-0xd24fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 11 14 15) *5
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:02: ioport range 0x500-0x57f has been reserved
system 00:02: ioport range 0x800-0x80f has been reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11bf has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0xfe00-0xfe00 has been reserved
system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:02: iomem range 0xfed13000-0xfed13fff has been reserved
system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
system 00:02: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:02: iomem range 0xfef00000-0xfeffffff has been reserved
pci 0000:01:00.0: BAR 6: can't allocate mem resource [0x000000-0x01ffff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: bridge window [0x4000-0x4fff]
pci 0000:00:01.0: bridge window [0xd0000000-0xd1ffffff]
pci 0000:00:01.0: bridge window [0xc0000000-0xcfffffff]
pci 0000:00:03.0: PCI bridge to [bus 05-05]
pci 0000:00:03.0: PCI bridge, secondary bus 0000:05
pci 0000:00:03.0: bridge window [io disabled]
pci 0000:00:03.0: bridge window [mem disabled]
pci 0000:00:03.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 09-09]
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:09
pci 0000:00:1c.0: bridge window [0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [0xd2000000-0xd21fffff]
pci 0000:00:1c.0: bridge window [0xd2600000-0xd27fffff]
pci 0000:00:1c.4: PCI bridge to [bus 19-19]
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:19
pci 0000:00:1c.4: bridge window [0x6000-0x6fff]
pci 0000:00:1c.4: bridge window [0xd2200000-0xd22fffff]
pci 0000:00:1c.4: bridge window [0xd2800000-0xd29fffff]
pci 0000:00:1c.5: PCI bridge to [bus 1d-1d]
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:1d
pci 0000:00:1c.5: bridge window [0x5000-0x5fff]
pci 0000:00:1c.5: bridge window [0xd2300000-0xd23fffff]
pci 0000:00:1c.5: bridge window [0xd2a00000-0xd2bfffff]
pci 0000:00:1e.0: PCI bridge to [bus 21-21]
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:21
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [0xd2400000-0xd24fffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0140 -> 0143)
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd1ffffff]
pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
pci_bus 0000:09: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:09: resource 1 mem: [0xd2000000-0xd21fffff]
pci_bus 0000:09: resource 2 pref mem [0xd2600000-0xd27fffff]
pci_bus 0000:19: resource 0 io: [0x6000-0x6fff]
pci_bus 0000:19: resource 1 mem: [0xd2200000-0xd22fffff]
pci_bus 0000:19: resource 2 pref mem [0xd2800000-0xd29fffff]
pci_bus 0000:1d: resource 0 io: [0x5000-0x5fff]
pci_bus 0000:1d: resource 1 mem: [0xd2300000-0xd23fffff]
pci_bus 0000:1d: resource 2 pref mem [0xd2a00000-0xd2bfffff]
pci_bus 0000:21: resource 1 mem: [0xd2400000-0xd24fffff]
pci_bus 0000:21: resource 3 io: [0x00-0xffff]
pci_bus 0000:21: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15706k freed
Simple Boot Flag at 0x38 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1338454076.582:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7655
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key EA640569FB439952
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:03.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.5: irq 28 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x20
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ACPI: SSDT 00000000bfe8b627 0017C (v01 PTLTD RSDT 00003000 INTL 20050228)
processor LNXCPU:00: registered as cooling_device0
ACPI: SSDT 00000000bfe8b7a3 00066 (v01 PTLTD RSDT 00003000 INTL 20050228)
processor LNXCPU:01: registered as cooling_device1
ACPI: SSDT 00000000bfe8b809 00066 (v01 PTLTD RSDT 00003000 INTL 20050228)
processor LNXCPU:02: registered as cooling_device2
ACPI: SSDT 00000000bfe8b86f 00066 (v01 PTLTD RSDT 00003000 INTL 20050228)
processor LNXCPU:03: registered as cooling_device3
ERST: Table is not found!
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd2504000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-220.17.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-220.17.1.el6.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003020
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-220.17.1.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-220.17.1.el6.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003060
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-220.17.1.el6.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2012-05-31 08:47:58 UTC (1338454078)
Initalizing network drop monitor service
Freeing unused kernel memory: 1244k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1040k freed
Freeing unused kernel memory: 1760k freed
dracut: dracut-004-256.el6_2.1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
udev: starting version 147
ACPI: WMI: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nouveau 0000:01:00.0: setting latency timer to 64
[drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x049d00a2)
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 05.71.22.60
[drm] nouveau 0000:01:00.0: TMDS table version 1.1
[drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed
[drm] nouveau 0000:01:00.0: BIT table 'd' not found
[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028
[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 03000302 00000000
[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0c011312 00000000
[drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 10 2
[drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
[drm] nouveau 0000:01:00.0: 2: 0x00000260: type 0x60 idx 2 tag 0xff
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xAB89
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xB4A1
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xBECF
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xC04A
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xC1BB
[drm] nouveau 0000:01:00.0: timingset 255 does not exist
[drm] nouveau 0000:01:00.0: timingset 255 does not exist
[drm] nouveau 0000:01:00.0: 2 available performance level(s)
[drm] nouveau 0000:01:00.0: 0: memory 660MHz core 450MHz voltage 1200mV fanspeed 20%
[drm] nouveau 0000:01:00.0: 1: memory 660MHz core 450MHz voltage 1200mV fanspeed 40%
[drm] nouveau 0000:01:00.0: c: memory 661MHz core 450MHz voltage 1200mV
[TTM] Zone kernel: Available graphics memory: 1961744 kiB.
[TTM] Initializing pool allocator.
[drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[drm] nouveau 0000:01:00.0: Saving VGA fonts
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 3)
[drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ffff880138bfcc00
fbcon: nouveaufb (fb0) is primary device
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
Console: switching to colour frame buffer device 160x64
fb0: nouveaufb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
usb 4-2: new low speed USB device using uhci_hcd and address 2
dracut: Starting plymouth daemon
Refined TSC clocksource calibration: 2400.085 MHz.
Switching to clocksource tsc
usb 4-2: New USB device found, idVendor=04b3, idProduct=310b
usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 4-2: configuration #1 chosen from 1 choice
input: HID 04b3:310b as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input4
generic-usb 0003:04B3:310B.0001: input,hidraw0: USB HID v1.00 Mouse [HID 04b3:310b] on usb-0000:00:1d.2-2/input0
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30a0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30a8 irq 15
ata1.00: ATAPI: HL-DT-ST RW/DVD GCC-H20N, 1.05, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-H20N 1.05 PQ: 0 ANSI: 5
Fusion MPT base driver 3.04.19
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SAS Host driver 3.04.19
mptsas 0000:1d:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
mptbase: ioc0: Initiating bringup
ioc0: LSISAS1064E B1: Capabilities={Initiator}
mptsas 0000:1d:00.0: setting latency timer to 64
scsi2 : ioc0: LSISAS1064E B1, FwRev=01100000h, Ports=1, MaxQ=511, IRQ=17
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x5000c500070f70f5
scsi 2:0:0:0: Direct-Access IBM-ESXS ST373455SS BA25 PQ: 0 ANSI: 5
firewire_ohci 0000:21:09.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
firewire_ohci: Added fw-ohci device 0000:21:09.0, OHCI version 1.10
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sd 2:0:0:0: [sda] 143374000 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: bb 00 10 08
sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
dracut: Scanning devices sda2 for LVM logical volumes vg_livedvd/lv_root vg_livedvd/lv_swap
dracut: inactive '/dev/vg_livedvd/lv_root' [32.36 GiB] inherit
dracut: inactive '/dev/vg_livedvd/lv_home' [29.64 GiB] inherit
dracut: inactive '/dev/vg_livedvd/lv_swap' [5.88 GiB] inherit
firewire_core: created device fw0: GUID 001e8c00000c399e, S400
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vg_livedvd-lv_root
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1338454085.755:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead: starting
udev: starting version 147
EDAC MC: Ver: 2.1.0 May 16 2012
EDAC MC0: Giving out device to 'i82975x_edac' 'i82975x': DEV (null)
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: irq 29 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
tg3.c:v3.119 (May 18, 2011)
tg3 0000:19:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
tg3 0000:19:00.0: setting latency timer to 64
tg3 0000:19:00.0: eth0: Tigon3 [partno(BCM95752) rev 6002] (PCI Express) MAC address 00:14:5e:64:d3:0f
tg3 0000:19:00.0: eth0: attached PHY is 5752 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:19:00.0: eth0: RXcsums[0] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:19:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
intel_rng: FWH not detected
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb3
platform microcode: firmware: requesting intel-ucode/06-0f-0b
microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb3
platform microcode: firmware: requesting intel-ucode/06-0f-0b
microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb3
platform microcode: firmware: requesting intel-ucode/06-0f-0b
microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb3
platform microcode: firmware: requesting intel-ucode/06-0f-0b
Microcode Update Driver: v2.00 , Peter Oruba
microcode: CPU0 updated to revision 0xba, date = 2010-10-03
microcode: CPU1 updated to revision 0xba, date = 2010-10-03
microcode: CPU2 updated to revision 0xba, date = 2010-10-03
microcode: CPU3 updated to revision 0xba, date = 2010-10-03
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
parport_pc 00:0d: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
ppdev: user-space parallel port driver
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
Adding 6160376k swap on /dev/mapper/vg_livedvd-lv_swap. Priority:-1 extents:1 across:6160376k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
vboxdrv: Found 4 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa0450240
vboxdrv: fAsync=0 offMin=0x37b offMax=0x1e84
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.1.16 (interface 0x00190000).
vboxpci: IOMMU not found (not compiled)
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.7 (July 20, 2011)
bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.8 (Oct 02, 2011)
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
tg3 0000:19:00.0: irq 30 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
tg3 0000:19:00.0: eth0: Link is up at 100 Mbps, full duplex
tg3 0000:19:00.0: eth0: Flow control is on for TX and on for RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
hda-intel: Invalid position buffer, using LPIB read method instead.
hda-intel: Invalid position buffer, using LPIB read method instead.
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
eth0: no IPv6 routers present
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
fuse init (API version 7.13)
tg3 0000:19:00.0: PME# enabled
tg3 0000:19:00.0: irq 30 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:19:00.0: eth0: Link is up at 100 Mbps, full duplex
tg3 0000:19:00.0: eth0: Flow control is on for TX and on for RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
tg3 0000:19:00.0: irq 30 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:19:00.0: eth0: Link is up at 100 Mbps, full duplex
tg3 0000:19:00.0: eth0: Flow control is on for TX and on for RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)